|No. of Batteries Required|
|Color Temperature (K)|
|Beam Angle (Degree)|
|Net Weight (lb)|
|Wattage of LED(W)|
Runway Lighting, Wall Lighting
Pack of 4 Units
Ideal for home, garden, yard, shed, walkway, pathway, driveway, patio, aisle, porch, etc.
Pack of 4 Units
Easy to install. No wiring required.
No electricity cost. Recharged by solar panel under sunlight, and no battery replacement.
Smart and sensitive detector. This light will automatically turns on at night when motion is detected.
Two light modes. Bright light and dim light.
Solar panel: 0.55W, 5.5V, 17% efficiency.
The solar panel on the top of the motion sensor light will convert sunlight into electricity and store into the Lithium battery during the day.
Lithium battery: 3.7V 900mAh (500 circles)
Protect function: over charging, over discharging, over current, short circuit
Charging time: No less than 8 hours in sunlight.
Discharging time/cycles when full-charging: 190 minutes, 300 cycles.
Applications: Home, garden, yard, shed, walkway, pathway, driveway, patio, aisle, porch, etc.
PIR (passive infrared) Motion Sensor
The instant motion is detected, the light turns to bright light automatically for approx 30s. When the motion stops, the light automatically turns to dim light again. It's totally motion activated.
Most applicable detection range. 2m, 120 degrees detection angle.
Illumination time for a single detection: 30 ±3 seconds
Light (dusk to dawn) Sensor
It will automatically turn to dim light (stand-by mode) at night, and turn off at day time.
4 x Solar LED Wall Lamp with PIR sensor
8 x Plastic screw anchors (for mounting holes)
8 x Screws (for mounting holes)
4 x Loop pins (To activate the sensor detector switch)
How to Install Guide
Do you have questions about this product?
No questions asked yet